상품카테고리 > 모듈/전기부품 > ADC/DAC

MCP4725 DAC모듈 (MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface)
판매가격 : 7,700
상품코드 :[1608]HJK-ADA-935
배송일 :당일발송
제조사 :Adafruit
브랜드 :Adafruit [브랜드몰 바로가기]
남은수량 : 10개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

DIGITAL -> ANALOG 컨버터모듈입니다. 사용하기 위해서 I2C 핀을 아두이노 혹은 마이크로컨트롤러에 연결합니다. 
만일, 아두이노를 사용하신다면, 다음의 링크를 통해서 소스코드를 다운로드 받을 수 있습니다.
https://learn.adafruit.com/mcp4725-12-bit-dac-tutorial/download


특징 (Features) : 

  • 12비트의 DAC를 사용하여 보다 정밀한 분해능을 가짐

  • 빠른 I2C 속도를 지원 (3.4Mbps)

  • 아두이노와 사용한다면 쉽고 믿을 수 있는 소스코드가 제공됨

  • 3~5V 동작가능하기에 3.3V 혹은 5V 구동 아두이노와 사용가능



응용 예제 (Application Examples) :


Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it can! This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it. Great for audio / analog projects, such as when you can't use PWM but need a sine wave or adjustable bias point.

We break out the ADDR pin so you can connect two of these DACs on one I2C bus, just tie the ADDR pin of one high to keep it from conflicting. Also included is a 6-pin header, for use in a breadboard. Works with both 3.3V or 5V logic.

Some nice extras with this chip: for chips that have 3.4Mbps Fast Mode I2C (Arduino's don't) you can update the Vout at ~200 KHz. There's an EEPROM so if you write the output voltage, you can 'store it' so if the device is power cycled it will restore that voltage. The output voltage is rail-to-rail and proportional to the power pin so if you run it from 3.3V, the output range is 0-3.3V. If you run it from 5V the output range is 0-5V.

We have an easy-to-use Arduino library and tutorial with a triangle-wave and sine-wave output example that can be used with any 'duino or ported to any microcontroller with I2C host. Wiring it up is easy - connect VDD to your microcontroller power pin (3-5V), GND to ground, SDA to I2C Data (on the Arduino Uno, this is A4 on the Mega it is 20 and on the Leonardo digital 2), SCL to I2C Clock(on the Arduino Uno, this is A5 on the Mega it is 21 and on the Leonardo digital 3) and listen on VOUT.

▶아래 플러스 친구 버튼을 통해 다양한 정보와 교제 자료 및 이벤트등의 소식을 받아보실 수 있습니다.







견적요청
구매대행
퀵/방문수령
후불결제
기술문의