타이니두이노 메인 프로세서보드 (코인셀배터리 버전) / TINYDUINO PROCESSOR BOARD
판매가격 : 26,400원 (부가세 포함)
상품코드 :[3769]WAD-DAV-ZAS
배송일 :당일발송
제조사 :Tinycircuits
브랜드 :Tinycircuits [브랜드몰 바로가기]
남은수량 : 5개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰

타이니두이노는 아두이노와 호환되는 초소형 마이크로컨트롤러로서 약 20mm x 20mm의 사이즈입니다. 

아래면에 CR1612-CR1632용 코인배터리 홀더가 장착되어 있습니다.


The TinyCircuits TinyDuino is an Arduino compatible board in an ultra compact package. Imagine the possibilities of having the full power of an Arduino Uno in a size less than a quarter! The TinyDuino processor board is roughly equivalent to the Arduino Uno board – same processor, same signals brought out to a shield connector. In fact, most Arduino sketches will work as is without any changes.

Includes:

  • Atmega328P processor (same as is used on the Arduino Uno)
  • Reset switch
  • Status LED
  • 8MHz ceramic resonator
  • Optional battery connector for CR1612-CR1632 coin cell batteries
  • External power supported with a 0.1″ power connection holes
  • Supports automatic switching between +5V and VBATT (if +5V is present, it will be used instead of the battery)

Specifications

  • Arduino and LilyPad Compatible
  • Expandable with Stackable TinyShield Boards
  • Optional battery connector for CR1612-CR1632 coin cell batteries
  • 0.1″ spaced solder holes for external power source
  • Robust Gold Finish – makes soldering easy and is non-corrosive
  • Ultra compact size and weight (smaller than a US Quarter!)
    • Square Version: 20mm x 20mm (.787 inches x .787 inches)
    • Circular Version: 20mm (.787 inches) diameter
    • Max Height (without battery holder): 2.9mm (0.12 inches)
    • Max Height (with battery holder): 6.58mm (0.26 inches)
    • Ultra-thin 0.61mm (0.024 inches) PCB
    • Weight: TBD grams (TBD ounces)
  • Atmel ATmega328P Microcontroller
    • 32KB Flash, 2KB RAM, 1KB EEPROM
    • 1.2mA (typical) @ 3V, 4MHz
    • Default Clock speed: 8MHz
  • 2.7V – 5.5V operating voltage (Arduino mode)
  • 1.8V – 5.5V operating voltage (with custom fw)
  • 20 I/Os (14 Digital, 6 Analog / Digital I/O) – All the signals on the Arduino Shield connectors are supported!
  • Arduino Bootloader preprogrammed (uses approx 0.5 KBytes of Flash Memory)

Design Files




License

Design by TinyCircuits. All design files are released under the Creative Commons Attribution Share-Alike 3.0 License, see the following link for details:http://creativecommons.org/licenses/by-sa/3.0

All text above must be included in any redistribution or derived design

This project uses designs and concepts developed as part of the Arduino project and the LilyPad project. The TinyCircuits design files themselves (schematics, PCB and libraries) are not directly derived from these works’ design files and have been created new, however the concepts and basic architecture behind the TinyDuino and TinyLily products are derived and we thank the hard work of the organizations below for their contributions to open-source hardware:

Original Arduino Uno Design by Team Arduino

LilyPad Arduino Design by Leah Buechley and Sparkfun Electronics

Please support the open-source hardware community

Image Map 메카리워즈






견적요청
구매대행
퀵/방문수령
후불결제
기술문의