SG90 몸체의 DC모터 (DC Motor in Micro Servo Body)
판매가격 : 5,500
상품코드 :[8008]HJK-ADA-2941
배송일 :당일발송
제조사 :Adafruit
브랜드 :Adafruit [브랜드몰 바로가기]
남은수량 : 14개
구매수량 :
최대구매수량 : 100개
총 금액 :
추가&대량구매 요청 053-588-4080

SG90의 바디에 DC모터가 들어가있는 제품입니다. DC모터의 스펙은 아래의 스펙을 참고해주세요.


  • Dimensions: 32.3mm x 12.3mm x 29.9mm / 1.3" x 0.49" x 1.2"
  • Spline Count: 21
  • Weight: 8.4g
  • No load speed: 110RPM (4.8v) / 130RPM (6v)
  • Running Current (at no load): 100mA (4.8v) / 120mA (6v)
  • Peak Stall Torque (4.8v): 1.3 kg/cm / 18.09 oz/in
  • Peak Stall Torque (6v): 1.5 kg/cm / 20.86 oz/in
  • Stall Current: 550mA (4.8v) / 650mA (6v)



  • This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less expensive than a micro servo (continuous or non-continuous) because there is no control board inside. Controlling speed is done by PWM'ing the power leads, controlling direction is done by swapping the power polarity - just like any brushed DC motor.

    Runs from 4-6VDC, we've powered it with a Lipoly and 3 alkaline, or 4 NiMH batteries with success. You cannot control this directly from a microcontroller pin! You must have a H-bridge such as a L293DTB6612 or a Motor shieldMotor HAT or  DC Motor + Stepper FeatherWing.

    Motor comes with 2x screws and 2x nuts for mounting to a chassis. No flanges or horns included - it's intended to mate with our little wheels, there's a screw to attach once they're plugged together. Build a robot vehicle of your own with these little motors driving it!

▶아래 플러스 친구 버튼을 통해 다양한 정보와 교제 자료 및 이벤트등의 소식을 받아보실 수 있습니다.







견적요청
구매대행
퀵/방문수령
후불결제
기술문의