라즈베리파이 오디오 고퀄리티 확장쉴드 / Expansion Shield x600 for Raspberry Pi B+/2B/3B
판매가격 : 62,700원 (부가세 포함)
상품코드 :[7658]WAD-JYL3-DFR-DFR0450
배송일 :당일발송
제조사 :DFRobot
브랜드 :DFRobot [브랜드몰 바로가기]
남은수량 : 3개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰

라즈베리파이 B+, 2, 3에서 사용할 수 있는 오디오 확장 쉴드입니다. 라즈베리파이 본체로부터 전원을 공급 받는 다른 쉴드와 달리, 이 쉴드는 자신이 라즈베리파이에 전원을 공급하므로 별도의 전원어뎁터가 필요합니다.



INTRODUCTION

The X600 Expansion Shield is a highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It uses an HDMI audio solution to give high-definition clear sound quality. It decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card.

The hat supports digital audio 5.1 channel output and 2.0 channel analog audio output, supports Dolby digital AC-3, DTS, LPCM and other digital audio format outputs. Use your Raspberry Pi as a multimedia player, lossless audio player or a network radio. We recommend OS images such as Raspbian, Volumio, OSMC, PiMusicBox, etc.


Note: Raspberry Pi is not included in the box.

SPECIFICATION

  • Input Voltage  
    • 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
  • Audio & Video
    • Allows you to extract audio signals from HDMI of your Raspberry Pi
    • Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
    • The SPDIF optical or coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 &     DTS 5.1CH audio
    • Extracts digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output  through its RCA style L/R analog output or earphone jack
    • Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
    • Maintains surround format when converting to digital optical audio  
    • Supports high definition input up to 1080p@ (24/60) Hz, output resolution follows input
    • Supports HDMI signal amplification and equalization output for repeater function
    • HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
  • SATA
    • Allows you to connect SATA devices to your Raspberry Pi 
  • Wireless
    • Built in IR sensor (38KHz)
  • Misc  
    • Power output socket  
    • Directly connected on top of the Raspberry Pi using the board GPIO header pins 
    • Solderless and no wires required 
    • Extra 40-pin header of the R-Pi in order to support existing expansion boards 
    • Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
  • Dimensions  
    • 85 x 56mm (Same size as Raspberry Pi) 

DOCUMENTS

SHIPPING LIST

  • X600 expansion board x1
  • Nylon spacers (M3 x 20mm) x4
  • Nylon screws (M3 x 6mm) x8
  • USB adapter x1
  • HDMI adapter x1

Image Map 메카리워즈






견적요청
구매대행
퀵/방문수령
후불결제
기술문의