상품카테고리 > 오픈소스하드웨어

타이니두이노 와이파이쉴드 / Tinyshield Wifi Board ATWINC1500
판매가격 : 88,000
상품코드 :[3426]JOHN
배송일 :당일발송
제조사 :Tinycircuits
브랜드 :Tinycircuits [브랜드몰 바로가기]
남은수량 : 6개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

Atmel ATWINC1500 WiFi 모듈을 기반으로 제작된  WiFi TinySheild를 사용하여 인터넷에 연결할 수 있습니다.


특징 (Features) :

  • Atmel ATWINC 1500 WiFi 모듈을 기반

  • 빠른 데이터 전송을 위해 SPI 통신을 사용

  • 연결 상태 및 활성 데이터 전송을 나타내는 LED 내장


Atmel ATWINC 1500 WiFi 사양 (Specification) :

  • IEEE 802.11 b/g/n(2.4GHz)

  • 내장된 IPv4 TCP/IP 스택

  • 최대 72Mbps PHY 처리량

  • Tx전력  : 11Mbps에서 +19.5dBm, CCK

  • Rx감도 : -88dBm, 11Mbps


사양 (Specification) :

  • 동작전압(Operating Voltage) : 3.3~5.5V

  • 이용전류(Using Current) : 액티브 모드(최고속도) +18dBm에서  311mA(Tx) / 80.5mA(Rx) 
                                              셧다운 모드 : 4uA

  • 이러한 요구사항으로 인해 TinyDuino 코인셀을 이용해서 실행할 수 없습니다.

  • 크기(Size) : 20mm x 30mm


구성품 (Component) :

  • 와이파이 타이니쉴드(ATWINC1500) x 1


참고자료 (noted items) :

  • 외국의 사용 예제는 여기를 눌러서 확인해주시길 바랍니다.

  • 메카솔루션 커뮤니티 Mechasolution Blog는 다양한 정보를 제공합니다.


DESCRIPTION

Connect your projects to the internet with the WiFi TinyShield! Based on the Atmel ATWINC1500 WiFi module, this module supports 802.11 b/g/n, SSL, different security modes (WEP, WPA, WPA2, and unsecured connections) and has a built-in TCP/IP Stack that offloads network processing from your TinyDuino. The easy to use Arduino/Atmel supplied software library shows numerous examples on how to scan for WiFi access points, connect to an access point, run DHCP, ping IP addresses, do DNS lookups, connect as a client to a webserver and download web pages, or even act as your own webserver and access point.

This TinyShield includes an integrated antenna on the module itself with FCC/CE approval as well as built-in LEDs that indicate connection state and active data transfer. This TinyShield also includes level shifters and a local power supply to ensure proper and safe operation over the entire TinyDuino operating voltage range up to 5V, and uses an SPI interface to allow for fast data transfers.

Note: This module can act as an access point!

To learn more about the TinyDuino Platform, click here


    TECHNICAL DETAILS

    To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix

    Atmel ATWINC1500 WiFi Specs

    • IEEE 802.11 b/g/n (2.4GHz)
    • Embedded IPv4 TCP/IP stack
    • Up to 72 Mbps PHY throughput
    • TX power: +19.5 dBm at 11 Mbps, CCK
    • RX sensitivity: –88 dBm, 11 Mbps

    TinyDuino Power Requirements

    • Voltage: 3.3V - 5.5V 
    • Current:
      • Active Mode, highest speed: 311mA TX at +18 dBm, 80.5mA RX
      • Shutdown Mode: <4uA
      • Due to the current requirements, this board cannot be run using the TinyDuino coin cell option

    Pins Used

    SPI Interface used

    • A3 - RESET: This signal is an input to the WiFi module and is used to reset the module.
    • 8 - SPI_CS: This signal is the SPI chip select for the WiFi module
    • 2 - SPI_IRQ: This signal is the interrupt output from the WiFi module and into the TinyDuino.
    • 11 - SCLK: This signal is the serial SPI clock out of the TinyDuino and into the WiFi module.
    • 12 - MISO: This signal is the serial SPI data out of the WiFi module and into the TinyDuino.
    • 13 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the WiFi module.

    Dimensions

    • 20mm x 30mm (.787 inches x 1.181 inches)
    • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
    • Weight: 2.39 gram (0.084 ounces)

    Notes

    • This board is compatible with the Arduino WiFi101 library which is available through the Arduino IDE Library manager!
    • However, the pin configuration is different, which requires the following line at the beginning of your setup() function:
      WiFi.setPins(8,2,A3,-1);

       


      Downloads


      ▶아래 플러스 친구 버튼을 통해 다양한 정보와 교제 자료 및 이벤트등의 소식을 받아보실 수 있습니다.













      견적요청
      구매대행
      퀵/방문수령
      후불결제
      기술문의