5인치 우퍼 스피커 유닛 / 8옴 50W / DS135-8
판매가격 : 38,500원 (부가세 포함)
상품코드 :[10616]HJK-PSE-295-426
배송일 :당일발송
제조사 :USA
브랜드 :Dayton Audio [브랜드몰 바로가기]
남은수량 : 4개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

5인치 크기의 우퍼 스피커 유닛입니다. 성능을 우선시하여 합리적인 가격으로 고성능의 기능을 제공해주는 스피커 유닛이며,
다양한 인클루저 및 정렬 장치에 사용될 때 최상의 오디오 시스템을 만들 수 있도록 설계되었습니다.


특징 (Features) :

  • 5인치 우퍼 스피커 유닛

  • 다양한 인클루저 및 정렬 장치에 최적화

  • 탁월한 저음 부스트


사양 (Specification) :

  • 정격출력 : 50W

  • 임피던스: 8옴

  • 주파수 응답: 50~7000Hz

  • 감도: 86.6 dB 2.83V/1m

  • 코일 지름: 2.5cm

  • 콘 재질: Coated Paper

  • 자석 재질: 페라이트

  • 프레임 재질: 철 (스틸)

  • 전체 외경: 13.4cm

  • 두께: 6.8cm


구성품 (Component) :

  • 5인치 우퍼 스피커 유닛 / 8옴 50W / DS135-8 x 1


참고자료 (noted items) :


Dayton Audio DS135-8 5" Designer Series Woofer Speaker

The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.

These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.

• Suggested enclosures:

Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8"H x 5-5/8"W x 3-1/2"DTypical results: 3 dB down-point (f3): 118 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 50 Hz.

Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4"H x 6-5/8"W x 4-1/8"D; Port dimensions (with flared exit): 1" dia. x 4"L. Typical results: 3 dB down-point (f3): 66 Hz; Tuning frequency (fb): 62 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 48 Hz.

Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling. 



Product Specifications
  • Nominal Diameter5"
  • Power Handling (RMS)50 Watts
  • Power Handling (max)100 Watts
  • Impedance8 ohms
  • Frequency Response50 to 7,000 Hz
  • Sensitivity86.6 dB 2.83V/1m
  • Voice Coil Diameter1"
  • Magnet Weight21 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs)52.5 Hz
  • DC Resistance (Re)5.9 ohms
  • Voice Coil Inductance (Le)0.84 mH
  • Mechanical Q (Qms)2.02
  • Electromagnetic Q (Qes)0.48
  • Total Q (Qts)0.39
  • Compliance Equivalent Volume (Vas)0.257 ft.³
  • Mechanical Compliance of Suspension (Cms)0.95 mm/N
  • BL Product (BL)6.23 Tm
  • Diaphragm Mass Inc. Airload (Mms)9.7g
  • Maximum Linear Excursion (Xmax)4.85 mm
  • Surface Area of Cone (Sd)75.4 cm²
Materials of Construction
  • Cone MaterialCoated Paper
  • Surround MaterialRubber
  • Voice Coil Wire MaterialCopper
  • Voice Coil FormerAluminum
  • Basket / Frame MaterialSteel
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter5.31"
  • Baffle Cutout Diameter4.39"
  • Depth2.7"
  • Bolt Circle Diameter4.96"
  • # Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume0.07 ft.³
  • Sealed F3113 Hz
  • Vented Volume0.15 ft.³
  • Vented F366 Hz

▶하단의 배너를 클릭하시면 hardwares.kr로 이동됩니다







견적요청
구매대행
퀵/방문수령
후불결제
기술문의