Dayton Audio DS135-8 5" Designer Series Woofer Speaker
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
• Suggested enclosures:
Sealed cabinet:Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8"H x 5-5/8"W x 3-1/2"D. Typical results:3 dB down-point (f3): 118 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 50 Hz.
Vented cabinet:Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4"H x 6-5/8"W x 4-1/8"D; Port dimensions (with flared exit): 1" dia. x 4"L. Typical results:3 dB down-point (f3): 66 Hz; Tuning frequency (fb): 62 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 48 Hz.
Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.
Power Handling (RMS)50 Watts
Power Handling (max)100 Watts
Frequency Response50 to 7,000 Hz
Sensitivity86.6 dB 2.83V/1m
Voice Coil Diameter1"
Magnet Weight21 oz.
Resonant Frequency (Fs)52.5 Hz
DC Resistance (Re)5.9 ohms
Voice Coil Inductance (Le)0.84 mH
Mechanical Q (Qms)2.02
Electromagnetic Q (Qes)0.48
Total Q (Qts)0.39
Compliance Equivalent Volume (Vas)0.257 ft.³
Mechanical Compliance of Suspension (Cms)0.95 mm/N
BL Product (BL)6.23 Tm
Diaphragm Mass Inc. Airload (Mms)9.7g
Maximum Linear Excursion (Xmax)4.85 mm
Surface Area of Cone (Sd)75.4 cm²
Materials of Construction
Cone MaterialCoated Paper
Voice Coil Wire MaterialCopper
Voice Coil FormerAluminum
Basket / Frame MaterialSteel
Overall Outside Diameter5.31"
Baffle Cutout Diameter4.39"
Bolt Circle Diameter4.96"
# Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
Sealed Volume0.07 ft.³
Sealed F3113 Hz
Vented Volume0.15 ft.³
Vented F366 Hz
▶아래 플러스 친구 버튼을 통해 다양한 정보와 교제 자료 및 이벤트등의 소식을 받아보실 수 있습니다.