Dayton Audio DS115-8 4" Designer Series Woofer Speaker
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
• Suggested enclosures:
Sealed cabinet:Type: Closed (alpha 1.9), Qtc 0.55; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9"H x 5-1/2"W x 3-1/2"D. Typical results:3 dB down-point (f3): 135 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 70 Hz.
Vented cabinet:Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.12 ft³; Internal cabinet dimensions (golden ratio): 9-1/2"H x 5-7/8"W x 3-5/8"D; Port dimensions (with flared exit): 1" dia. x 6"L. Typical results:3 dB down-point (f3): 73 Hz; Tuning frequency (fb): 69 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 55 Hz.
Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.
Power Handling (RMS)35 Watts
Power Handling (max)70 Watts
Frequency Response60 to 8,000 Hz
Sensitivity85.3 dB 2.83V/1m
Voice Coil Diameter1"
Magnet Weight11 oz.
Resonant Frequency (Fs)55.2 Hz
DC Resistance (Re)5.8 ohms
Voice Coil Inductance (Le)0.8 mH
Mechanical Q (Qms)2.10
Electromagnetic Q (Qes)0.46
Total Q (Qts)0.38
Compliance Equivalent Volume (Vas)0.15 ft.³
Mechanical Compliance of Suspension (Cms)1.05 mm/N
BL Product (BL)5.88 Tm
Diaphragm Mass Inc. Airload (Mms)7.9g
Maximum Linear Excursion (Xmax)4.1 mm
Surface Area of Cone (Sd)54.1 cm²
Materials of Construction
Cone MaterialCoated Paper
Voice Coil Wire MaterialCopper
Voice Coil FormerAluminum
Basket / Frame MaterialSteel
Overall Outside Diameter4.55"
Baffle Cutout Diameter3.69"
Bolt Circle Diameter4.21"
# Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)