아두이노 PWM 쉴드 (SparkFun PWM Shield)
판매가격 : 24,200원 (부가세 포함)
상품코드 :[3069]JOHN2
배송일 :당일발송
제조사 :Sparkfun
브랜드 :SparkFun [브랜드몰 바로가기]
남은수량 : 2개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

서보모터 제어, LED 밝기 제어에 활용할 수 있는 16개 PWM제어를 지원하는 쉴드입니다.

Description: This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ground rails. Because the IC can be daisy-chained, output headers are broken out on one side of the shield and can be connected to our TLC5940 Breakout to further expand your PWM capabilities. 

Use this board to increase the number of PWM pins available to your microcontroller for applications such as monocolor, multicolor or full-color LED displays, LED signboards, display backlighting, servo control, or any other project where a large number of PWM drivers are necessary.

Note: While each 3-pin PWM header is 0.1" spaced, the space between each header is slightly larger in order to accommodate servo connections. In order to make this board suitable for use with servos, 2.2k pull-up resistors have been included on each output as well. Finally, the 2.2k resistor on the Iref pin sets the output current to 17.8mA but a parallel through-hole connection is provided for an additional resistor to increase the current if necessary. To determine the resistor value you need for a given output check the equations provided on the schematic below.

Documents:

▶하단의 배너를 클릭하시면 hardwares.kr로 이동됩니다







견적요청
구매대행
퀵/방문수령
후불결제
기술문의