릴레이는 높은 전압을 제어하기 위한 스위치이며, 본 제품은 5V의 전압으로 ~30DCV, ~250ACV를 제어할 수 있습니다. 사용방법 및 예제는 아래의 Wiki를 참고해주세요.
Gravity 시리즈는 모든 제품에 대한 사용방법(Wiki)을 제공하며, 표준화된
커넥터를 통해 손쉬운 방법으로 연결할 수 있는 제품입니다. 아두이노, 라즈베리파이 등 다양한 플랫폼과 사용할 수 있으며, Gravity 확장쉴드를 사용하면 아두이노와 Gravity 시리즈를 더
손쉽게 연결/사용할 수 있습니다. 동일 센서/모듈들에 비해 비교적 저렴하며, 연결 케이블(Female
to Female)이 포함되어있습니다.
INTRODUCTIONThe DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appliances of high power and other equipments. The modular design makes it easy to integrate with a controller board. The Relay integrates a status LED, in order to acknowledge visually it's status ON or OFF. It can be controlled through the digital IO port, with a simple HIGH or LOW on Arduino compatible boards. Other boards will work requiring same voltage level. Other usages include control of solenoid valves, lamps, motors and other high current or high voltage devices.
Latest Update: V3.1 - Improved the silkscreen on the bottom layer of the sensor to indicate the hardware connection.
- Some kits may include acrylic holder and nylon screw set to prevent shorting of high power interface with metalic surface.
SPECIFICATION- Single relay board
- Rated through-current: 10A (NO) 5A (NC)
- Maximum switching voltage: 150VAC 24VDC
- Interface: Digital
- Control signal: TTL level
- Contact Rating (Res. Load): 10A 277VAC / 24VDC
- Max. switching voltage 250VAC / 30VDC
- Max. switching current 15A
- Max. switching power 2770VA 240W
- UL Rating: 10A 120VAC / 10A 277VAC
- Operate time (at nomi. Vot.): 10ms
- Release time (at nomi. Vot.): 5ms
- High quality connector
- Immersion gold surface
SHIPPING LIST- Gravity Relay Module V3.1 x1
- Digital Cable x1
|
