포토 트랜지스터 아날로그 광센서입니다. 주변의 빛(조도)을 센싱할 수 있습니다. 광학 필터가 내장되어 있어 사람의 눈과 비슷한 반응을 보입니다. 긴핀이 + (3~15VDC) 짧은핀이 -(GND,1K~10K)입니다. 빛에 따라 전류가 변화합니다. 데이터 시트는 아래의 링크를 참고하세요.
This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin to the short pin. This sensor has a built-in optical filter (probably IR filter) so it'll do a fair job of simulating light levels as the human eye does. Basically, connect the long + pin to 3-15VDC or so, and the short - pin through a ~1K-10K series resistor to ground. When its dark, there's almost no current flowing through the sensor or resistor and the analog voltage is near ground. When there's light near the sensor, the current through the resistor will increase, raising the voltage. You can adjust the series resistor to get the voltage range you need, and measure the analog voltage with a microcontroller.
TECHNICAL DETAILS- Datasheet
- Sensor Dimensions: 5mm x 5.3mm / 0.20" x 0.21"
- Weight:
|
