상품카테고리 > 전자 부품 > 센서보드 > 가스센서

가스 센서 브레이크아웃보드
판매가격 : 1,430원 (부가세 포함)
상품코드 :[3334]ZAS-POL-1479
제조사 :Pololu
브랜드 :Pololu [브랜드몰 바로가기]
구매수량 : 일시품절된 상품입니다. (주문: 053-588-4080)
총 금액 :

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰
MQ 시리즈의 가스센서들을 보다 쉽게 사용할 수 있는 브레이크아웃 보드입니다.

0.95" x 0.7"의 작은 사이즈지만 고정용 구멍, 저항을 연결할 수 있는 구멍등이 나있어 사용이 용이합니다.

https://cafe.naver.com/mechawiki/3521



This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headers and standard breadboards and perfboards. This board has two mounting holes and provides convenient pads for mounting the gas sensor’s required sensitivity-setting resistor.

Overview

This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, +5V VCC, and an analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headersand standard breadboards and perfboards. This board has two mounting holes and provides convenient pads for mounting the gas sensor’s required sensitivity-setting resistor (referred to as RL in the sensor datasheet). All of the board’s traces are on the same side of the PCB, making it easy to see how the pads are connected.

The two mounting holes are intended to be used with #2 screws (not included).

Note that we also offer an alternate gas sensor breakout board that is more compact, with a diameter equal to that of the smaller gas sensor and the broken-out pins beneath the sensor.



메카리워즈






견적요청
구매대행
퀵/방문수령
후불결제
기술문의