타이니두이노에 사용할 수 있는 OLED쉴드입니다. 0.96인치 크기이며 96x64 RGB픽셀, 16비트의 컬러풀한 색상을
사용할 수 있습니다.SSD1331드라이버를 사용하며, 다양한 라이브러리를 지원합니다.
What is TinyDuino Series?
타이니두이노는 아두이노와 호환되는 아두이노 시리즈입니다. 기존 보드들에 비해 가격대가 비싼편이지만 크기가 작아 다양한
프로토타입을 만들 수 있다는 장점이 있습니다. 컨트롤러 보드와 프로토보드, 센서, 모터드라이버 등 다양한 보드들이 있으며,
아래 사진과 같이 적층하여 사용할 수 있습니다.
DESCRIPTION
Update: Be sure to check out the TinyScreen+, an updated version that puts the processor, USB, battery charging and TinyScreen into a single board!
Originally Launched on Kickstarter!
TinyScreen is a beautiful color OLED display for your TinyDuino system. Create video games, a video player, or your own smart watch using this Tiny OLED screen! The screen is 0.96" diagonal with a resolution of 96x64 RGB pixels, each with 16-bit color. Since this is an OLED, there is no backlight needed and the screen is very bright with excellent colors. Four buttons are located along the side of the screen to allow for user input - like for playing games or creating menus for your projects (like is done on the TinyScreen Smartwatch project). The screen has a built in IO expander over I2C for control signals and button control, which eliminates using extra pins on the TinyDuino for this.
The screen uses an SSD1331 driver for the OLED display, and we have a highly optimized and easy to use library for this which supports both the OLED screen and the buttons on the board, even allowing for 20FPS+ video playback from a microSD with the TinyDuino. It's also very easy to create your own projects to display text and graphics, or create your own tiny games.
The TinyScreen is also available with an alternative device address, which allows two TinyScreens to be used on the same TinyDuino stack when used with a Ribbon Cable Extender or with a TinyScreen+.
To learn more about the TinyDuino Platform, click here
TECHNICAL DETAILS
To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix
TinyScreen Specs
- 96x64 OLED display, 16-bit color depth
- 0.96" (24.4mm) viewable area
- Total Size: 1.02" x 0.98" (25.8mm x 25.0mm)
- SSD1331 display controller
- Software controllable backlight (OLED brightness)
- Power down mode
- Four push buttons along the sides (connected to IO pins)
TinyDuino Power Requirements
- Voltage: 3.0V - 5.5V
- Current: 20 - 45mA (depending on brightness), due to the current requirements, this board cannot be run using the TinyDuino coin cell option
Pins Used
SPI and I2C Interface used:
- A5/SCL - I2C Serial Clock line
- A4/SDA - I2C Serial Data line
- 11 - SCLK: This signal is the serial SPI clock out of the TinyDuino and into the TinyScreen.
- 13 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the TinyScreen.
- Note: SPI Chip select and button inputs are handled by the on-board I2C GPIO expander.
Dimensions
- Dimensions: 25.8mm x 25mm (1.01 inches x .984 inches)
- Max Height (screen surface to bottom of TinyShield connector): 4.40mm (0.173inches)
- Weight: 3.2 grams (.113 ounces
