정품 아두이노 프로 328 (Arduino Pro 328 - 3.3V/8MHz)
판매가격 : 18,700원 (부가세 포함)
상품코드 :[3792]WAD-DAV-ZAS
배송일 :당일발송
제조사 :Sparkfun
브랜드 :SparkFun [브랜드몰 바로가기]
남은수량 : 1개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰

아두이노 우노 보드에 있는 헤더들이 불필요한 메이커들은 아두이노 프로 보드를 사용하실 수 있습니다. 간혹, 헤더로 인해서 두께 혹은 디자인상 제약을 겪는 메이커들이 계시는데, 본 제품이 조금은 도움이 될 듯 합니다. FTDI를 별도로 구입하셔서 프로그래밍을 해야하지만, 여러 개의 아두이노 컨트롤러를 사용한다면, 하나의 FTDI로 다수의 아두이노 보드에 프로그램을 업로드 할 수 있기 때문에 보다 경제적일 수 있습니다. 

Description: It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower than other Arduino development boards, it may not be compatible with many Arduino shields which were designed to run at 5V. The Arduino Pro 3.3V still works great with our prototyping shield so you can create your own 3.3V shields. The lower system voltage also has its advantages, like ease of use with many common 3.3V sensors.

Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

To keep things affordable and low profile, we’ve chosen to make the DC power jack footprint available, but not to populate it. We recommend running the board with a LiPo battery for better portability. Also, to keep the cost low, we made changes like using all SMD components and switching to a two layer PCB.

This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. In this latest version of the Arduino Pro we’ve also moved the FTDI headers back just a skoach so that the pins don’t hang over the edge of the board. We’ve also populated it with a sturdier power selection switch.

Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!

Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.

Features:

  • ATmega328 running at 8MHz external resonator
  • Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, Accelerometers, sensors, etc)
  • USB connection off board
  • 3.3V regulator
  • Max 150mA output
  • Over current protected
  • Reverse polarity protected
  • DC input 3.3V up to 12V
  • Resettable fuse prevents damage to board in case of short
  • Power select switch acts as on/off switch

Dimensions: 2.1x2.05" (53.34x52.08mm)

Documents:

Replaces:DEV-09221

메카리워즈






견적요청
구매대행
퀵/방문수령
후불결제
기술문의