상품카테고리 > 전자 부품 > 센서보드 > 가스센서

Gravity 아날로그 적외선 CO2센서 / 이산화탄소 측정 / Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
판매가격 : 83,600원 (부가세 포함)
상품코드 :[6586]ZAS-DFR-SEN0219
배송일 :당일발송
제조사 :DFRobot
브랜드 :DFRobot [브랜드몰 바로가기]
남은수량 : 1개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰
이산화탄소의 농도를 측정할 수 있는 센서모듈입니다. 이산화탄소를 고정밀로 측정할 수 있으며 0~5000ppm 범위까지 측정이
가능합니다. 비분산 적외선 기술을 기반으로 제작되었으며 다른 제품들과 달리 높은수명(최대 5년)이 장점입니다. 아두이노에서
도 사용이 가능하며 그에 대한 예제 및 코드는 아래의 Wiki링크를 참고해주세요.


What is Gravity Series?


Gravity 시리즈는 모든 제품에 대한 사용방법(Wiki)을 제공하며표준화된 커넥터를 통해 손쉬운 방법으로 연결할 수 있는 제품입니다
아두이노, 라즈베리파이 등 다양한 플랫폼과 사용할 수 있으며, Gravity 확장쉴드를 사용하면 아두이노와  Gravity 시리즈를 더 손쉽게 
연결/사용할 수 있습니다. 동일 센서/모듈들에 비해 비교적 저렴하며, 연결 케이블(Female to Female)이 포함되어있습니다


INTRODUCTION

The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there’s a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in global climate change. How to accurately measure the carbon dioxide gas concentration is becoming a universal research topic.

DFRobot released its latest high-precision analog infrared CO2 sensor. The effectively measuring range is from 0 to 5000ppm. This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency. Besides, its service life could up to 5 years! It integrates temperature compensation and support DAC output. Most importantly, the product is easy to use; it is compatible with all types of microcontrollers such as Arduino with ADC function.

In addition, this product is a high-performance sensor that combines technology of mature infrared absorption gas detection with precision optical circuit design as well as sophisticated circuit design. It has characteristics such as high sensitivity, high resolution, low power consumption, fast response, anti-water vapor interference, no poisoning, high stability and long life.

This sensor is able to directly compatible with the DFRobot Arduino IO expansion board thanks to its external DFRobot Gravity interface. This character simplify the use of the sensor as it is plug and play and no need additional wiring. 

This product could be widely used in HVAC, indoor air quality monitoring, industrial process and security protection monitoring, agriculture and animal husbandry production process monitoring. 

DFRobot provides detailed tutorials and code, please check the product wiki.

Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm) arduino connection
DFRobot LCD Keypad Shield with Infrared Co2 Sensor
This is a 0~5000ppm CO2 sensor with analog output. It supports Arduino and other microcontrollers with ADC function. In addition, we also have a 0~50000 ppm wide range infrared sensor with Gravity UART interface, Compatible with Arduino, Raspberry Pi and other microcontrollers: Gravity: UART Infrared CO2 Sensor (0~50000ppm).

FEATURES

  • Waterproof and anti-corrosion
  • High sensitivity
  • Low power consumption
  • Excellent stability
  • Temperature compensation
  • Excellent linear output
  • High cycle life
  • Anti-water vapor interference
  • No poisoning
  • SPECIFICATION

  • Gas Detection: Carbon Dioxide
  • Operating Voltage: 4.5 ~ 5.5V DC
  • Average Current: <60mA @ 5V
  • Peak Current: 150mA @ 5V
  • Output Signal: Analog output (0.4 ~ 2V)
  • Measuring Range: 0 ~ 5000ppm
  • Accuracy: ± (50ppm + 3% reading)
  • Preheating Time: 3min
  • Response Time: 120s
  • Operating Temperature: 0 ~ 50 ℃
  • Operating Humidity: 0 ~ 95% RH (no condensation)
  • Service Life: >5 years
  • Size: 37mm * 69mm
  • weight: 34g
  • DOCUMENTS

  • Product WIKI 

  • SHIPPING LIST

  • Gravity: Analog Infrared CO2 Sensor For Arduino x1
  • Analog Sensor Cable for Arduino x1
  • 메카리워즈






    견적요청
    구매대행
    퀵/방문수령
    후불결제
    기술문의