상품카테고리 > 전자 부품 > 센서보드 > IMU센서

3축 가속도센서 LI3DH / SparkFun Triple Axis Accelerometer Breakout - LIS3DH
판매가격 : 12,000원 (부가세 포함)
상품코드 : [3621]ZAS-SP-13963
배송일 : 당일발송
제조사 : Sparkfun
브랜드 : SparkFun [브랜드몰 바로가기]
남은수량 : 2개
구매수량 :
총 금액 :
추가&대량구매 요청 053-588-4080

  • 상품상세
  • 관련상품
  • 배송/교환/반품 안내
  • 상품리뷰
LIS3DH 기반의 저전력 3축 가속도센서입니다. SPI 또는 I2C 인터페이스이며, 1.7~3.6v에서 사용가능합니다.


Description: The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF, or 3 Degrees of Freedom. Inertial Measurement Units (or IMUs) can provide additional space location data, such as gyroscopic or magnetometric. The LIS3DH provided on this breakout operates under the same principles but gives a few analog inputs to play with, and it has some built-in movement detection abilities.

The LIS3DH is easy to set up; just wire up your choice of interface (SPI or I2C), supply 3.3V, and ground. This sensor works nicely with a breadboard for easy connection, and, because it gives some mass to the accelerometer, it more closely matches what might be expected from a project or cellphone.

The LIS3DH Breakout is a 3.3V device! Supplying voltages greater than ~3.6V can permanently damage the IC. As long as your Arduino has a 3.3V supply output, and you’re fine with using I2C, you shouldn’t need any extra level shifting. But if you want to use SPI, you may need a level shifter.

GET STARTED WITH THE LIS3DH BREAKOUT GUIDE

Features:

  • 1.7V–3.6V
  • Three Modes:
    • Power-Down
    • Normal
    • Low-Power
  • ±2g/±4g/±8g/±16g Dynamically Selectable Fullscale
  • 10bit, 32-Level FIFO
  • 6D/4D Orientation
  • Free-fall Detection
  • Motion Detection
  • Embedded Temperature Sensor

Documents:

메카리워즈






견적요청
구매대행
퀵/방문수령
후불결제
기술문의